Skyjack SJ12 User Manual

34
SJ12, SJ16213721AAA
Section 4 – Inspections Before Operation Visual and daily maintenance inspections
4.2-6 Platform assembly
Do the inspection that follows in sequence:
WARNING
Fall Hazard. Use the three points of contact
principle when you use the MEWP to enter or exit
the platform. If you do not obey, there is a risk of
death or serious injury.
1. Enter the platform and close the gate.
1
Platform railings
▪
Make sure there are no loose or missing parts,
and there is no visible damage.
▪
Make sure that all railings are correctly
installed.
▪
Make sure that all fasteners are tight.
▪
Make sure that the gate is in good condition
and operates correctly.
▪
Make sure that the platform foot pedal is in
good working order and that it has no loose or
missing parts and there is no visible damage.
2
Fall-protection anchorages
▪
Make sure that the fall-protection anchorages
are correctly attached.
▪
Make sure the fall protection anchorages show
no signs of visible damage, deformation, or
cracks.
3
AC power socket
▪
Make sure that the socket is free of dirt or
blockages.
4
Platform control console
▪
Make sure the control console is locked with
lock-pins.
▪
Make sure the platform control cable is
correctly locked, and there is no visible
damage.
2. Exit the platform, and close the gate.
5
Manual storage box
▪
Make sure that the operation manual and
other important documents are in the manual
storage box.
▪
Make sure that the documents are in good
condition, and you can read them.
▪
Always put the manuals and other documents
back in the storage box after use.
1
4
3
5
2

Skyjack SJ12 Specifications

General

Gradeability	25%
Drive Motor	24V DC
Machine Width	32 in (0.81 m)
Stowed Height	6.5 ft
Overall Width	32 in (0.81 m)
Stowed Height (Rails Folded)	6.5 ft
Drive Speed (Elevated)	0.5 mph (0.8 km/h)
Power Source	Electric