Skyjack SJ12 User Manual

46
SJ12, SJ16213721AAA
Section 4 – Inspections Before Operation Operator’s Checklist
4.4 Operator’s checklist
1831AA
Optional equipment and attachments - Do an inspection for leaks and
loose, damaged, or missing components. Refer to the Operation manual
for the applicable optional equipment or attachment.
Flashing lights
Function Tests
Do a test of the main power disconnect switch
Do a test of the emergency-stop button on the base
Do a test of the off/base/platform key switch
Do a test of the lower/neutral/raise switch
Do a test of the emergency-lowering function
Do a test of the emergency-stop button on the platform
Do a test of the function-enable switch
Do a test of the steer function
Do a test of the drive function
Do a test of the anti-tiedown function
Do a test of the brakes
Do a test of the platform raise and lower functions
Do a test of the horn
Do a test of the pothole protection device
Do a test of the platform maintenance limit switch
Do a test of the elevated travel speed
Do a test of the SGLE switch (optional equipment)
Do a test of the  ashing light (optional equipment)
P N/A Comment (if item does not pass inspection)
Visual and Daily Maintenance Inspections
NOTE: Make a copy of this page or go to www.skyjack.com for a copy that you can print.
(page 2 of 2)

Skyjack SJ12 Specifications

General

Gradeability	25%
Drive Motor	24V DC
Machine Width	32 in (0.81 m)
Stowed Height	6.5 ft
Overall Width	32 in (0.81 m)
Stowed Height (Rails Folded)	6.5 ft
Drive Speed (Elevated)	0.5 mph (0.8 km/h)
Power Source	Electric