Skyjack SJ45T User Manual

It is the responsibility of the operator to read, completely understand and follow all instructions and warnings
contained in this operating manual and on the aerial platform.
FAMILIARIZATION
2.3-6 Control Compartment
- Ensure all compartment latches are
secure and in proper working order.
• Base Control Console
- Ensure all switches are returned to their
neutral positions.
- Ensure there are no loose or missing
parts and there is no visible damage.
• Hydraulic Tank
- Ensure hydraulic ller cap is secure.
- Ensure tank shows no visible damage
and no evidence of hydraulic leakage.
• Hydraulic Oil
- Be sure that the boom is in the stowed
position, and then visually inspect the
sight gauge located on the side of the
hydraulic oil tank.
- The hydraulic oil level should be between
the minimum and maximum marks on
the sight glass. Add oil as needed. Refer
to Table 4.2b for recommended oil type.
• Hydraulic Return Filter
- Ensure lter element is secure.
- Ensure there are no signs of leakage or
visible damage.
• Brake and Main Manifolds
- Ensure all ttings and hoses are properly
tightened and there is no evidence of
hydraulic leakage.
- Ensure there are no loose wires or
missing fasteners.
• Emergency Power Unit
- Ensure there are no loose or missing
parts and there is no visible damage.
- Ensure there are no loose wires or
missing fasteners.
- Ensure all ttings and hoses are properly
tightened and there is no evidence of
hydraulic leakage.
• Fuel Tank
IMPORTANT
Before using your aerial platform ensure
there is enough fuel for expected use.
- Ensure fuel ller cap is secure.
- Ensure tank shows no visible damage
and no evidence of fuel leakage.
Base Control
Console
Fuel Tank
Brake Manifold
Hydraulic Tank
Emergency Power
Unit
Main Manifold
Hydraulic Return
Typical SJ 40T/45T shown
Page 24
SJ 40T & SJ 45T
SJ 61T & SJ 66T
Visual & Maintenance Inspection Section 2 - Familiarization

Skyjack SJ45T Specifications

General

Brand	Skyjack
Model	SJ45T
Category	Boom Lifts
Language	English