EasyManuals Logo

Skyjack SJ45T User Manual

Skyjack SJ45T
106 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #55 background imageLoading...
Page #55 background image
Section 3 - Operation Start Operation
3.8-16 To Raise or Lower Main Boom Using
Platform Control Console
1. Depress and hold footswitch.
2. Push and hold boom/turret controller in this
direction to raise main boom or
to lower main boom.
3. Release controller handle to stop.
3.8-17 To Rotate Turret Using Platform Control
Console
WARNING
When rotating the turret, ensure that there
are no personnel or obstructions in the
path of rotation, including blind spots.
1. Depress and hold footswitch.
2. Push and hold boom/turret controller in this
direction to rotate clockwise or to
rotate counterclockwise.
3. Release controller handle to stop.
NOTE
Turret can be rotated continuously
360 degrees.
3.8-18 To Sound Horn
1. Press horn pushbutton to sound horn.
Release pushbutton to stop sounding horn.
3.8-19 To Operate Using Emergency Power
Switch at Platform Control Console
This is a momentary-type switch. This switch allows all
functions except drive function to operate in the event
of engine malfunction. Refer to Section 2.6 for the
emergency lowering procedure.
NOTE
The emergency power unit has two-minute
duty cycle.
CAUTION
Do not use emergency power unit
continuously for two minutes.
3.8-20a To Engage Differential Lock Switch
1. Depress and hold footswitch.
2. On platform control console, push differential lock
switch forward to the locked position and
then release.
3.8-20b To Disengage Differential Lock Switch
1. Ensure path of intended motion is clear.
2. Depress and hold footswitch.
3. P u l l differential lock s w i t c h back w a r d
” to the unlocked position and then release.
NOTE
To disengage differential lock mechanism, it may
be necessary to release drive torque. This can be
accomplished by operating drive (alternating directions)
and/or steer functions (alternating directions).
3.8-21 Shutdown Procedure
1. Completely retract boom and lower platform.
2. Push in emergency stop button on platform
control console and on base control console.
3. Turn base/off/platform key switch to off
position. Remove key.
4. Turn main power disconnect switch to off
position.
For aerial platform with cold weather start option:
NOTE
When temperature gets below -10°C
(+14°F), ensure aerial platform is parked
close to AC outlet.
5. Plug in battery warmer/hydraulic oil heater into
AC outlet at least 4 hours before starting engine.
SJ 40T & SJ 45T
SJ 61T & SJ 66T
Page 55

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Skyjack SJ45T and is the answer not in the manual?

Skyjack SJ45T Specifications

General IconGeneral
BrandSkyjack
ModelSJ45T
CategoryBoom Lifts
LanguageEnglish

Related product manuals