It is the responsibility of the operator to read, completely understand and follow all instructions and warnings
contained in this operating manual and on the aerial platform.
FAMILIARIZATION
2.6 Emergency Lowering Procedures
This section guides the operator on how to use
emergency lowering system. This system allows
platform lowering in the event of an emergency or
engine malfunction.
NOTE
The emergency power unit has two-minute
duty cycle.
CAUTION
Do not use emergency power unit
continuously for more than two minutes.
2.6-1 Base Control Console
1. Ensure engine is off.
2. Pull out “ ” emergency stop button.
3. Turn key switch to “ ” base position.
4. Select “ ” emergency power position from
start/function enable/emergency power (start/
emergency power) switch and activate desired
boom function.
2.6-2 Platform Control Console
1. Ensure engine is off.
2. Pull out “ ” emergency stop button.
3. Select “ ” on position from engine start/on/off
switch.
4. Depress and hold footswitch.
5. Turn “ ” emergency power switch to “ ” on
position and activate desired boom function.
SJ 40T & SJ 45T
SJ 61T & SJ 66T
Page 41
Section 2 - Familiarization Procedures
To Next Page
Loading...
Need help?
General
