EasyManuals Logo

Skyjack SJ45T User Manual

Skyjack SJ45T
106 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #52 background imageLoading...
Page #52 background image
Start Operation Section 3 - Operation
3.8-2 To Rotate Platform Using Base Control
Console
1. Activate function enable by selecting and
holding start/function enable/emergency power
(function enable) switch to function enable
position.
2. Push platform rotation switch to either ” left or
” right position. Release switch to stop.
3.8-3 To Rotate Turret Using Base Control
Console
WARNING
When rotating the turret, ensure that there
are no personnel or obstructions in the
path of rotation, including blind spots.
1. Activate function enable by selecting and
holding start/function enable/emergency power
(function enable) switch to function enable
position.
2. Push turret rotation switch to either clockwise
or counterclockwise position. Release
switch to stop.
NOTE
Turret can be rotated continuously
360 degrees.
3.8-4 To Move Jib Up and Down Using Base
Control Console (If Equipped)
1. Activate function enable by selecting and
holding start/function enable/emergency power
(function enable) switch to function enable
position.
2. Push jib up/down switch to either ” up or
” down position. Release switch to stop.
3.8-5 To Raise or Lower Main Boom Using Base
Control Console
1. Activate function enable by selecting and
holding start/function enable/emergency power
(function enable) switch to function enable
position.
2. Push main boom raise/lower switch to either
raise or lower position. Release
switch to stop.
3.8-6 To Extend or Retract Fly Boom Using Base
Control Console
1. Activate function enable by selecting and
holding start/function enable/emergency power
(function enable) switch to function enable
position.
2. Push y boom extend/retract switch to either
extend or retract position. Release
switch to stop.
3.8-7 To Level Platform Using Base Control
Console
1. Activate function enable by selecting and
holding start/function enable/emergency power
(function enable) switch to function enable
position.
2. Push platform leveling override switch to either
up or down position. Release
switch to stop.
Page 52
SJ 40T & SJ 45T
SJ 61T & SJ 66T

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Skyjack SJ45T and is the answer not in the manual?

Skyjack SJ45T Specifications

General IconGeneral
BrandSkyjack
ModelSJ45T
CategoryBoom Lifts
LanguageEnglish

Related product manuals