Skyjack SJ45T User Manual

It is the responsibility of the operator to read, completely understand and follow all instructions and warnings
contained in this operating manual and on the aerial platform.
FAMILIARIZATION
WARNING
Ensure that you maintain three points
of contact to mount/dismount platform.
5. Enter platform and close gate.
6. On platform control console, select
“ ” on position from engine start/on/off
switch.
7. Select “ ” start position from engine
start/on/off switch until engine starts.
8. Dismount from platform.
9. On base control console, attempt to
activate each boom and platform switch
while holding start/function enable/
emergency power (function enable)
switch in function enable position.
Result: All boom and platform functions
should not operate while holding start/
function enable/emergency power
(function enable) switch in function enable
position.
10. Push in “ ” emergency stop button to
turn engine off.
11. Pull out “ ” emergency stop button.
Emerg e n cy
Stop
Base Control
Console
Off/Base/Platform
Key Switch
Start/Function
Enable/Emergency
Power Switch
Start/
Emergency
Power
Switch
Base/Off/
Platform Key
Switch
Base Control
Console
Function
Enable Switch
Page 32
SJ 40T & SJ 45T
SJ 61T & SJ 66T
Function Tests Section 2 - Familiarization

Skyjack SJ45T Specifications

General

Brand	Skyjack
Model	SJ45T
Category	Boom Lifts
Language	English