SJ643 TH & SJ843 TH 216201ADA
55
Section 5 – Operation
This section provides the necessary information
needed to operate the telehandler. Read and
completely understand the operating manual and all
warnings and instruction labels (refer to Section 8 –
Labels) on the telehandler.
WARNING
DO NOT operate this telehandler without proper
authorization and training. Doing so could result in
death or serious injury.
Before operating this telehandler, perform the
following tasks:
1. Visual and daily maintenance inspections (see
Section 4.2)
2. Function tests (see Section 4.3)
3. Jobsite inspection (see Section 2.4)
4. If, as a result of the risk assessment, the need
for rescue planning is identied, a system of
communication shall be established between
people working on the platform and nominated
support personnel trained in the use of ground
controls for platform retrieval.
WARNING
An operator should not use any telehandler that:
▪
does not appear to be working properly.
▪
has been damaged or appears to have worn
or missing parts.
▪
has alterations or modications not approved
by the manufacturer.
▪
has safety devices which have been altered or
disabled.
▪
has been tagged or blocked out for non-use
or repair.
Failure to avoid these hazards could result in death
or serious injury.
WARNING
DO NOT operate telehandler under engine power
in an enclosed space. Use only in an open or well-
ventilated area.
To Next Page
Loading...
