Skyjack SJ643 TH - 7.3 Tire and Wheel Specifications

216201ADA SJ643 TH & SJ843 TH
86
Section 7 – Specications Tire/Wheel Specifications
Models SJ643 TH & SJ843 TH
FILL Size Pressure
Ply
Rating
Wheel
Nuts
Torque
PRIMEX G3000
AIR
13.00 X 24 TG
G-2
87 psi (600 Kpa)
16
"442 ft.-lb.
(600 Nm)"
FOAM -
GPX Rough Terrain L3
R Grade Rock XT (Hard
Surface)
AIR
13.00 X 24 L3
GPX
80 psi (552 Kpa)
FOAM -
GALAXY GIRAFFE XLW
AIR
13.00 X 24 14 PR
87 psi (600 Kpa)
FOAM -
SOLIDAIR -
50.787 X 8.5 X
13.00 X 24
N/A -
SOLIDBOSS - 50 X 13.00 X 24 N/A -
BLACKSTONE FOAM 13.00 X 24 - 16
1458AA
7.3 Tire/Wheel SpecicationsTable
WARNING
Do not use tires other than those specied for this
machine. Do not mix different types of tires. Tires
other than those specied can adversely affect
stability. Failure to operate with matched, approved
tires in good condition can result in serious
injury or even death. Replace tires with the exact,
Skyjack-approved types only.
IMPORTANT
For proper function of each axle differential, all
four wheels must have same tire size installed at
all times. Failure to comply with this requirement
reduces the life of the differentials and reduce
overall mobility of telehandler.