216201ADA SJ643 TH & SJ843 TH
72
Section 5 – Operation Platforms for Elevating Personnel
5. After the locking device is installed, disconnect
the auxiliary hydraulic hoses and cover them
with the existing caps. Refer to gure 45.
Figure 45 Auxiliary Hydraulics disconnection
6. Secure the carriage hoses between the carriage
and the platform as shown in gure 46.
Figure 46 Hydraulic Hoses
7. Secure the locking device to the Personnel Work
Platform as shown in gure 47 when the platform
is not in use.
NOTE
Ensure the Personnel Work Platform pins are
moved to the upper cut out hole of the platform
pockets, to properly secure the locking device.
Pin moved to the
upper cut out
hole
Figure 47 Auxiliary Function Locking Devices
To Next Page
Loading...
