SMA SI 5048 - Events, Warnings and Failures (History); Failure; Event (400#)

Parameter lists SMA Solar Technology AG
180 SI5048-TEN093630 Technical Description
19.4 Events, Warnings and Failures (History)
19.4.1 Failure / Event (400#)
You can find further information about the menus "410# Failures Current", "420# Failure History" und
"430# Event History" starting on chapter 10.9”Display of Warnings and Failures” (page79).
19.5 Functions in Operation
19.5.1 Operation (500#)
510# Operation Inverter
Number Name Description Value Description Default
value
01 InvRs Triggering a new start
of the Sunny Island
Restart Restart
02 InvRmOpEna Time-controlled
inverter operation
Disable Enable Disable
Enable Disable
03 InvTmOpStrDt Start date for time-
controlled inverter
operation
2006.01.01
yyyy.mm.dd
04 InvTmOpStrTm Start time for time-
controlled inverter
operation in hh:mm:ss
Value can be
set freely
05 InvTmOpRnDur Run time for time-
controlled inverter
operation hh:mm:ss
Value can be
set freely
06 InvTmOpCyc Repetition cycle for
time-controlled
inverter operation
(Tm1)
Single One-time Single
Dayly daily
Weekly weekly