SMA SI 5048 - Direct Access to the Parameters; Direct Access (600#)

SMA Solar Technology AG Parameter lists
Technical Description SI5048-TEN093630 183
550# Operation MMC
560# Operation Grid
19.6 Direct Access to the parameters
19.6.1 Direct Access (600#)
Direct access to parameters is explained in detail in chapter 10.3”Direct Access (to the parameters)”
(page69).
Number Name Description Value Description Default
value
01 ParaSto Save parameter
settings
Set1 Parameter Set1
Set2 Parameter Set2
02 ParaLod Load parameter
settings
Set1 Parameter Set1
Set2 Parameter Set2
Factory Load factory
settings
03 CardFunc Functions of the SD
card
ForcedWrite Forced writing
StoEvtHis Save event
memory
StoFailHis Save error
memory
04 DatLogEna Automatic data
storage
Off Disable On
On Enable
Number Name Description Value Description Default
value
01 GdManStr Manual grid start Auto Automatic Auto
Stop stop
Start Start