Mounting the Device SMA Solar Technology AG
24 SI5048-TEN093630 Technical Description
• Vertical installation or tilted backwards by max. 45 °.
• Never install the device with a forward tilt.
• Do not mount in a horizontal position.
• The connection area may not point upwards.
• In a living area, do not mount the unit on
plasterboard walls etc. in order to avoid audible
vibrations.
The Sunny Island can make noises when in use
which can be considered a nuisance when installed
in a living area.
• Observe the minimum clearances to walls as well
as to other devices and objects as shown in the
illustration.
To Next Page
Loading...
