Mounting the Device SMA Solar Technology AG
26 SI5048-TEN093630 Technical Description
2. Secure the wall mounting bracket to the wall using
appropriate screws and washers.
3. Hang the Sunny Island onto the wall mounting
bracket using the opening in its rear for this
purpose.
4. Screw the Sunny Island to the wall mounting
bracket on both sides using the screws (M6x8)
provided. Only tighten the screws by hand.
☑ The Sunny Island is now mounted on the wall.
5. Make sure it is securely in place.
6. Close the recessed grips with the air grills provided.
To help you identify the sides, the air grills are
marked with "links/left" or "rechts/right" on the
inside.
To Next Page
Loading...
