SMART GX Series - Appendix 11 Disabling the Embedded os and Other Inputs; Disabling the Embedded os

smarttech.com/kb/171861 101
Appendix 11 Disabling the embedded
OS and other inputs
Admins can disable specific inputs, including the embedded Android OS. This is ideal for environments
that use only connected devices.
You cannot enable or disable the Android input unless a Settings Lock Password has been enabled (See
System on page79).
Disabling the embedded OS
1.
Open the display’s settings from the Home screen by tapping the Apps icon and then tapping
the Settings icon . You can also press the Settings button on the remote control.
The display’s Settings dialog appears.
Note
If the Settings lock password is enabled, you must enter the password before you can change the
source settings. See System on page79.
2.
In Input and output > Input settings > Rename/enable inputs, and disable the Android input.
When Android is disabled, the Home button is also disabled on the front control panel and the remote
control.
To disable other inputs, select a different input under Rename/Enable inputs and follow the same
process.
See System on page79.