SMART GX Series - Freeze Commands; Screen Shade Commands; Volume Commands; Mute Commands

Appendix 9 Managing your display using RS-232
smarttech.com/kb/171861 97
Freeze commands
Get command Set command Response
get videofreeze set videofreeze[Value]
Where [Value] is one of the following:
l
=on
l
=off
videofreeze=[Value]
Where [Value] is one of the following:
l
on
l
off
Screen shade commands
Get command Set command Response
get screenshade set screenshade[Value]
Where [Value] is one of the following:
l
=on
l
=off
screenshade=[Value]
Where [Value] is one of the following:
l
on
l
off
Volume commands
Get command Set command Response
get volume set volume[Value]
Where [Value] is one of the following:
l
+[Value]
l
-[Value]
l
=[0–100]
volume=[Value]
Where [Value] is a number between 0
and 100
Mute commands
Get command Set command Response
get mute
set mute[Value]
Where [Value] is one of the following:
l
=on
l
=off
mute=[Value]
Where [Value] is one of the following:
l
on
l
off