Chapter 2 Installing the display
smarttech.com/kb/171861 22
Installing the display on a stand
If you want to move the display from place to place or if it’s not possible to install the display on a wall,
you can install it on a stand.
Note
If you want to use the 86" model (SBID-GX186-V2) with a variety of SMART's electric height-adjustable
stands, you must first attach a SMART wall mount (model WM-SBID-200, part #1031766,
smarttech.com/kb/171405) to the display before mounting the display to the stand. (This applies to the
FSE-400, FSE-410, and FSE-420 models of mobile stand and the WSE-400 and WSE-410 models of
wall stand).
Using SMART mobile stands
SMART mobile stands are designed for SMART interactive displays. They are height-adjustable. Some
models include integrated speakers, a locking cabinet to secure equipment, and casters that swivel and
lock for easy movement.
For more information about SMART mobile stands, see smarttech.com/accessories.
Using a third-party stand
For information about selecting and using a third-party stand, see Installing your SMART Board GX on a
stand.
Connecting to a network
The display requires a network and internet connection for downloading software and firmware
updates.
Configuring network settings
Network administrators need to configure the display’s network connection to enable over-the-air
firmware updates for a number of the embedded apps.
To Next Page
Loading...
