smarttech.com/kb/171861 52
Chapter 4 Maintaining the display
Turning the display on or off 52
Cleaning and maintaining the display 53
Checking the display installation 53
Cleaning the screen 54
Cleaning the touch sensors 54
Maintaining ventilation 55
Preventing condensation 55
Replacing the pens 55
Removing and transporting the display 56
Updating system firmware 57
Applying a firmware update 57
Updating system firmware manually 57
With proper maintenance, the display will provide years of use.
Turning the display on or off
In most situations, you can put the display in Standby mode when not using it by following the
instructions in
SMART Board GX (V2) series interactive displays user guide
(smarttech.com/kb/171862).
In some situations, such as when you move the display or clean its screen, you need to turn the display
off. You can turn it back on after.
To turn the display off
1.
Press the Power button on the front control panel or the remote control for three seconds and
wait for the status light to stop blinking.
To Next Page
Loading...
