SMART GX Series - Page 51

Chapter 3 Connecting computers and other devices
smarttech.com/kb/171861 51
No. Connector Connects to Notes
1 USB 2.0 for the
embedded OS and OPS
slot computer
USB 3.2 Gen 1 for
peripherals
USB Type-C 2 input (video,
audio, and touch)
See Connecting room computers
and guest laptops on page32 and
USB cables and connectors.
The connector will switch to the
active input, including the display’s
embedded OS, the OPS slot
computer, or an external
computer.
Note
The USB 3.2 Type-C connector
can also provide 15 W of power
to connected devices.
2 HDMI 2.0 in HDMI 3 input
(videoandaudio)
See Connecting room computers
and guest laptops on page32 and
HDMI cables and connectors.
3 USB 2.0 Type-B Touch input Use this touch input with the HDMI
video and audio input on the front
of the display.
See Connecting room computers
and guest laptops on page32 and
USB cables and connectors.
4 USB 3.2 Gen 1 Type-A Supported USB drives and
other peripherals
See Connecting other devices on
page44 and USB cables and
connectors.
The connector will switch to the
active input, including the display’s
embedded OS, the OPS slot
computer, or an external
computer.
5 USB 3.2 Gen 1 Type-A Supported USB drives and
other peripherals
See Connecting other devices on
page44 and USB cables and
connectors.
The connector will switch to the
active input, including the display’s
embedded OS, the OPS slot
computer, or an external
computer.