Chapter 3 Connecting computers and other devices
smarttech.com/kb/171861 43
Connecting a SMART OPS PC module
If your organization has purchased a SMART OPS PC module, you or your
organization’s installers can install the OPS PC module in the display’s
accessory slot following the OPS PC module’s installation instructions
(smarttech.com/kb/171544). You can then view the OPS PC module’s input on
the display.
Caution
Do not insert or remove the OPS PC from the accessory slot while the display
is turned on.
For more information about SMART OPS PC modules, see the
SMART OPS PC modules user guide
(smarttech.com/kb/171747).
To Next Page
Loading...
