SMART GX Series - Connecting an External Display; Connecting Other Devices; Connecting USB Drives and Other Peripherals

Chapter 3 Connecting computers and other devices
smarttech.com/kb/171861 44
Connecting other devices
In addition to computers, you can connect a variety of other devices to the display:
l
USB drives and other peripherals
l
External displays
l
External audio systems
l
Room control systems
Connecting USB drives and other peripherals
The display includes two USB 3.2 Gen 1 Type-A receptacles on the front connector panel and two USB
3.2 Gen 1 Type-A receptacles on the side connector panel. You can connect USB drives, peripherals (such
as keyboards), and other devices to the USB 3.2 Gen 1 Type-A receptacles and use these devices with the
display’s embedded OS or OPS slot computer. The display’s USB 3.2 Gen 1 Type-A receptacles will switch
to the active input.
Connecting an external display
You can connect an external display using the HDMI 2.0 Out out connector on the connector panel.
The external display shows the same image as the display. This is useful when you’re using the display in
an auditorium or other large space where a second display would be beneficial.