Chapter 3 Connecting computers and other devices
smarttech.com/kb/171861 46
Use of an external audio system must be enabled in display settings (see
Input and output
on page75).
Important
Use a 3.5 mm stereo jack (15 mm long barrel only) to connect to the display’s stereo 3.5 mm Out
connector.
Note
l
You can use the display's volume controls to adjust the volume of an audio system connected to
the display’s stereo 3.5 mm Out connector.
In addition to the stereo 3.5 mm ut connector, the display also provides a Sony/Philips Digital Interface
(S/PDIF) Out connector (pictured). S/PDIF is a digital audio transmission medium. You need an audio
receiver that supports S/PDIF to use this connection with an external sound bar or other audio system.
To Next Page
Loading...
