SMART GX Series - Page 49

Chapter 3 Connecting computers and other devices
smarttech.com/kb/171861 49
No. Connector Connects to Notes
2
USB 3.2 Gen 1 Type-A Supported USB drives and
other peripherals
See Connecting other devices on
page44 and USB cables and
connectors.
The connector will switch to the
active input, including the display’s
embedded OS, the OPS slot
computer, or an external
computer.
Note
Connect a USB mouse to
navigate the display’s on-screen
menu during troubleshooting.
3
USB 2.0 Type-B Touch See Connecting room computers
and guest laptops on page32 and
USB cables and connectors.
4 USB 2.0 Type-C USB Type-C 1 input
(supported USB drives, video,
audio, and touch)
See Connecting room computers
and guest laptops on page32 and
USB cables and connectors.
The connector will switch to the
active input, including the display’s
embedded OS, the OPS slot
computer, or an external
computer.
5
HDMI 2.0 HDMI 1 input
(videoandaudio)
See Connecting room computers
and guest laptops on page32.
6
HDMI 2.0 HDMI 2 input
(videoandaudio)
See Connecting room computers
and guest laptops on page32.
7
USB 2.0 Type-A [N/A] This connector is a service port
(connects to the embedded OS).
8
RS-232 Room control system See Appendix 9 Managing your
display using RS-232 on page90
and RS-232 cables and
connectors.
9
S/PDIF out Digital audio output See Connecting an external audio
system on page45 and Digital
audio cables and connectors.
10
HDMI 2.0 out External display See Connecting an external
display on page44.