Important information
smarttech.com/kb/171861 5
l
You must connect the USB cable that came with the display to a computer that has a USB
compliant interface and that bears the USB logo. In addition, the USB source computer must be
compliant with IEC 62368-1. The source computer must be CE marked and carry safety
certification marks for Canada and USA. This is for operating safety and to avoid damage to the
display.
l
Wait five minutes after disconnecting power from the display before removing accessories from
the display’s OPS slot to allow the accessory to cool.
Important
The following table includes the normal operating power requirements for the display:
Models Regulatory
Models
Power requirements
SBID-GX165-V2 IDGX65-2 100V to 240V AC, 50 Hz to 60 Hz, 74 W
SBID-GX175-V2 IDGX75-2 100V to 240V AC, 50 Hz to 60 Hz, 87 W
SBID-GX186-V2 IDGX86-2 100V to 240V AC, 50 Hz to 60 Hz, 119 W
For additional requirements and other information, refer to the display’s specifications (see
More
information
on page14).
To Next Page
Loading...
