Appendix 7 Adjusting display settings
smarttech.com/kb/171861 80
Option Values Function Notes
Clear password [N/A] Clears the lock screen password. [N/A]
Set password [N/A] Set a lock screen password. This option is available when an
existing password has been
cleared.
Change password [N/A] Change the four-digit lock screen
password.
The passcode is set when turning
on the display for the first time.
Important
The display’s
Screen lock
feature
is enabled only when a
passcode is set.
Settings lock password Access options for configuring the
settings lock password.
[N/A]
Clear password [N/A] Clears the settings lock password. [N/A]
Set password [N/A] Set a password to access certain
settings.
The Settings Lock Password is not
the same as the user’s Lock Screen
Password.
Change password [N/A] Change the four-digit settings lock
password.
[N/A]
Startup and shutdown
Startup input [N/A] Options for configuring startup and
shutdown settings.
[N/A]
Startup input Last shutdown
input
PC
Android
HDMI1
HDMI2
HDMI3
Type-C1
Type-C2
DP
VGA
Select which input source is
selected on startup. Disabled inputs
will not appear in the list.
By default, the input source active
at the last shutdown is the selected
startup input.
The
PC
option is available when an
OPS PC module is installed in the
display’s accessory slot.
Enter Ready mode after
startup
On
Off
Enables or disables whether the
display enters Ready mode after
starting.
When enabled, the display enters
Ready mode after starting and no
image is displayed on the screen.
Pressing the power or home
buttons will wake the display.
Wake On LAN On
Off
Enables or disables waking the
display when it receives a Magic
Packet via the network.
Note
The display’s power
consumption may increase
when
Wake On LAN
is enabled.
[N/A]
To Next Page
Loading...
