SMART GX Series - Page 82

Appendix 7 Adjusting display settings
smarttech.com/kb/171861 82
Option Values Function Notes
Check for update [N/A] Manually check for updates to the
display’s firmware.
If an update is available, a
message appears on screen and
asks whether the user wishes to
install it.
Note
The display must be connected
to the internet to check for
system software updates. Check
the display’s network settings.
To check the network settings for
SMART Board GX (V2) series
interactive displays, see Network
on page73.
Factory reset
Factory reset Cancel
Confirm
Resets all options to their default
values.
Only administrators should reset
the display to factory settings
Security
Credential storage [N/A] You can view installed trusted
system and user credentials
(certificates), control the enabling
status of these credentials, and
view the details of each certificate.
[N/A]
Trusted credentials [N/A] View and enable or disable trusted
credentials.
[N/A]
System [N/A] Enable or disable trusted system
credentials.
[N/A]
User [N/A] Enable or disable trusted user
credentials.
[N/A]
User credentials [N/A] View and modify user credentials. [N/A]
Install from storage [N/A] Install a certificate from local
storage or a USB drive.
[N/A]
Clear credentials [N/A] Removes security certificates from
the display.
Caution
Removing security certificates
may affect the performance of
some applications.
Install from unknown
sources