HRX-OM-Q026
Chapter 1 Safety Instructions
HRSH Series 1.1 Before Using the Product
1-1
Chapter 1 Safety Instructions
1.1 Before Using the Product
● This chapter is intended to specifically describe the safety related
issues for handling the product. Read this before handling the product.
● The product is a cooling device using circulating fluid. SMC does not
take any responsibility for any problems that may arise from using the
product for other purposes.
● This product is not designed for a clean room. It generates dust from
the internal components such as pump and fan motor.
● The product is operated at high voltage and contains components which
become hot and rotate. If a component needs to be replaced or
repaired, contact a specialized vendor for parts and service.
● All personnel who work with or around the product should read and
understand the safety related information in this manual carefully before
starting work.
● The safety manager is responsible for strictly observing safety
standards, but responsibility in respect to safety standards during daily
work resides with each individual operator and maintenance personnel.
● Do not use the materials that rust or corrode for the circulating fluid and
facility water circuits. Using the materials that tend to rust or corrode
may cause clogs or/and leakages of the circulating fluid and facility
water circuits. In case of using these kind of materials, consider and
carry out some prevention against the rusting or corrosion on the
customer side.
● This manual must be kept available to operators whenever necessary.
1.2 Reading the Manual
This manual contains symbols to help identify important actions when
installing, operating or maintaining the product.
Before using the product, be sure to read and understand all the
important actions highlighted in this manual.
To Next Page
Loading...
