SMC Networks HRSH100-A 20 Series - Setting;Checking of Offset Function

HRX-OM-Q026
Chapter 5 Display and Setting of Various Functions
HRSH Series 5.9 Offset Function
5-25
5.9.3 Setting/checking of offset function
The table below shows the set items of the offset function and the default
values.
Table 5.9-2 Set items for offset function
Display
Item
Contents
Default
Offset mode
Offset mode is set ON/OFF.
OFF
Offset temperature
Sets offset temperature.
- - - -
1. Press and hold the [MENU] key for approximately 2 seconds.
Repeat pressing the key until the key-lock setting screen [ ] appears on the digital
display.
Setting/Checking: Offset mode
2. Press the [SEL] key 6 times.
Setting screen of offset mode appears on the digital display.
3. Select offset mode with [▲] key or [▼] key, and press the [SEL] key to enter.
Table 5.9-3 Offset function setting
Set value
Explanation
Default
Offset function OFF
✓
Offset mode 1
Offset mede 2
Offset mode 3
PV
SV
PV
SV
PV
SV
PV
SV
Press and
hold [MENU]
key.
Press and
hold [MENU]
key.