Smeg GW2145 - Custom Programs

User Manual
GW2145 - GW1160 - GW4060 - GW4190
Page 28 - 86
4.6.3 CUSTOM PROGRAMS
Programs 10, 12, 13, 14 and 15 can be modified to meet specific washing requirements.
Modifications can be made using the Smeg TRACELOG software (not part of the standard package) or by Smeg
authorised engineers on request.
For details of how to purchase the software and minimum installation requirements, contact your local dealer or mail
Smeg directly at instruments@smeg.it .
If parameters are modified from the default settings, a record should be kept of the various phases and the new
program settings.
Warning: when creating a custom program, do not include more than two thermal disinfection phases
at 93°C for 10min.
CUSTOM PROGRAM RECORD TEMPLATE
Program
1. Prewash /
Wash (cold)
2. Wash /
Enzymatic Wash
3. Chemical
Disinfection
4. Neutralisation
5. Mains Water
Rinse
6. Demi Rinse
7. Hot Demi Rinse
8. Thermal
Disinfection / Td +
lubrication
9. Drying
A0
Cycle time (except
drying)
ID.
Name
H2O Intake
Temp. [°C]
duration [min]
H2O Intake
Temp. [°C]
duration [min]
H2O Intake
Temp. [°C]
duration [min]
H2O Intake
Temp. [°C]
duration [min]
H2O Intake
Temp. [°C]
duration [min]
H2O Intake
Temp. [°C]
duration [min]
H2O Intake
Temp. [°C]
duration [min]
H2O Intake
Temp. [°C]
duration [min]
Temp. [°C]
duration [min]