Smeg GW2145 - Set Parameters Explained

User Manual
GW2145 - GW1160 - GW4060 - GW4190
Page 41 - 86
5.3 “SET“ PARAMETERS
Set on the display.
To access this item press the Start/Stop button.
The Set item contains a number of setting parameters.
User level operators can only display the parameters and cannot modify any “Set” parameters.
Set
PARAMETER
DESCRIPTION
POSSIBLE USER ACTION
With set parameter
“-d=0”
With set
parameter
“-d=1”
-1
Detergent pump P1 dispensing rate.
Setting in ml/litre, with maximum threshold of 10 ml/litre.
The default value of this parameter is 5ml/litre.
Maximum recommended quantity with Smeg detergents:
10ml/litre.
Increase and decrease with the Selection buttons.
Display and
Modification
Display
-2
Detergent pump P2 dispensing rate.
Setting in ml/litre, with maximum threshold of 20 ml/litre.
The default value of this parameter is 3ml/litre.
Maximum recommended quantity with Smeg detergents:
10ml/litre.
Increase and decrease with the Selection buttons.
Display and
Modification
Display
-3
Detergent pump P3 dispensing rate.
(not present on GW2145)
Setting in ml/litre, with maximum threshold of 20 ml/litre.
The default value of this parameter is 10ml/litre.
Maximum recommended quantity with Smeg detergents:
15ml/litre.
Increase and decrease with the Selection buttons.
Display and
Modification
Display
-4
Water hardness setting
Set the hardness in °f, in steps of 5. Range: 5-60°f. The
default setting is 40°f.
Warning: Make sure that the value is actually the same as
the hardness of the water used.
Display and
Modification
Display and
Modification
-5
Automatic opening at end of cycle
The default setting on GW appliances is “On”, but
automatic door opening can be disabled by changing the
parameter to “OF”.
If the option is enabled, the device door is opened
automatically at the end of the cycle.
Display and
Modification
Display and
Modification
-6
Printer language
English by default, the language can be chosen from the
various options available
Display and
Modification
Display and
Modification
German
French
Spanish
Italian
English
dE
Fr
ES
It
En
-7
Demineralised water
The use of demineralised water can be activated or
deactivated depending on whether or not the relative
connection has been made (Activated: dn, Deactivated: --)
Display and
Modification
Display and
Modification