Smeg WD2145 - Temporary Disabling of Demi Water

User Manual
WD2145-WD1160-WD4060-WD4190
Page 35 - 85
fig. 22 – Once the cycle start command is given, the display alternates the program selected with the time remaining before it actually starts.
fig. 23 – Example of use of the delayed start to set a delay of 1 h
5.11.3 TEMPORARY DISABLING OF DEMI WATER
(Funzionaliltà presente a partire dalla versione firmware main 1.8.0.32 Aprile 2013).
Press the “Start/Stop” and “Door opening” buttons simultaneously for a moment to display the
status of the “demineralised water disabling” option.
The Selection buttons can be used to deselect the use of demineralised water.
Modifications to the parameter must be confirmed using the “Start/Stop” button.