WD2145-WD1160-WD4060-WD4190
10 INSTALLATION
The device's characteristics and positioning and installation instructions are provided below.
10.1 TECHNICAL DATA
The documentation includes a description of the rated characteristics of the electrical connection, all the intake and
outlet connections and the ambient conditions for which the appliance was designed (ref. point 5.4.2 of IEC61010-
1:2001).
For “non electric” intakes, the pressure and flow ranges are provided (ref. point 5.4.2 IEC61010-2-040:2005).
2 - Demineralised (recommended)
200 kPa – 500 kPa (2 bar – 5 bar)
Type of threaded connection
Required flow [min - max]
Mains water hardness [max]
42 °f
(for models equipped with a steam condenser, the use of purified water with hardness
below 15°f is recommended).
Cold water temperature [max]
Demineralised water conductivity [max]
Limits depending on microbial
contamination
Minimum microbiological quality required: “potable water" (ref. limits in
accordance with Italian Legislative Decree 31/2001)
Standard External [Height x Width x
Depth]
Standard External - aquastop accessory
[Height x Width x Depth] - overall height is
increased by +7mm
Standard External - PAD1 accessory
[Height x Width x Depth] - overall depth is
increased by +110mm / +150mm
(depending on the model of PAD installed)
Standard External - peristaltic pump P3
accessory [Height x Width x Depth] -
(overall depth of WD1160, WD4060) is
increased by +60mm
Weight of appliance + packaging
To Next Page
