Maintenance
158-159
Remove the Adhesive
Why
Applying an appropriate amount of water-soluable adhesive on the glass build plate before printing can
enhance the first layer adhesion of the print. However, if not removed after printing, the residual adhesive on
the build plate might affect your next print.
When
Every time after you apply the adhesive on the build plate.
How
1. Prepare the cleaning tool: water and the wiping cloth (in the Quick Start Guide kit);
2. Power off the machine;
3. Moisten the wiping cloth with water and wipe off the adhesive from the build plate.
Remove the Grease and Dust
Why
Our hands or other body parts might leave a small amount of natural oil and dust on the plate surface when
touching the glass build plate. Besides, the dust in the air will also adhere to the plate. If not removed in time,
the first layer adhesion of the print might be weakened.
When
At least once every two weeks.
How
1. Prepare the cleaning tool: water and the wiping cloth (in the Quick Start Guide kit);
2. Power off the machine;
3. Moisten the wiping cloth with water and gently wipe the build plate surface until there is no obvious grease,
dust, or other stains.
If it is difficult to remove the grease with water, you can try the ethyl alcohol.
To Next Page
Loading...
