User Guide 16
BASIC SETUP
Step IV: Attach the Tagg Tracker to Your Pet’s Collar
Your Tagg setup is almost complete. The illustrations below demonstrate how the tracker (top)
attaches to the collar using the collar clip (middle) and strap (bottom). Follow these easy steps to
attach the tracker properly.
Attaching the Collar Clip to the Collar
1. Remove the collar from your pet.
2. Holding the collar in one hand, place the collar clip on top of the collar as shown:
3. Hook one side of the strap into the collar clip groove on one side of the collar clip.
4. Holding the collar clip and strap in place with one hand, use your other hand to stretch the free
end of the strap* under the collar and up into the groove on the other side of the collar clip:
* Different color straps represent different sizes. The clear strap is for small collars and gray is for large collars.
The collar clip attachment should be snug on your pet’s collar.
CAUTION: It may take some force to stretch the strap all the way. Do not use tools or other devices to
attach the strap. Doing so may result in damage to the clip or strap.
Tracker
Collar clip
Strap
To Next Page
Loading...