socomec DIRIS B-10L - 7. Product LEDs

41
EN
DIRIS B-10L - 551174A - SOCOMEC
7. PRODUCT LEDS
These LEDs can be used to nd out the status of the device at any time.
The addressing button is used to automatically assign a Modbus address from the gateway.
Power supply
Alarm
Metrology
LoRa card status
LED OFF Flashing Stable
ON
(Green)
Device is off
- 10 sec during startup
- Manual blinking command
Product ON
ALARM
(Red)
No active alarm System alarm active on a device
At least one Protection Alarm and/or
Logical Alarm and/or Measurement
Alarm is active
COM
(Orange)
LoRa card not started or not
connected to LoRa network
LoRa card is pairing
LoRa card is connected and
operational
(Red)
No energy flowing
Energy is owing (corresponds to
the metrological pulse weight)
-