42
EN
DIRIS B-10L - 551174A - SOCOMEC
8. LoRaWAN COMMUNICATION
8.1. General information
LoRaWAN is a wireless communication protocol allowing to collect measurement data from remote DIRIS B-10L power
monitoring devices.
The DIRIS B-10L can communicate via a private LoRaWAN network or via an operated network.
8.2. LoRa Key Recovery
• Go to www.socomec.com/activate-lora-product/ or ash the following QR code
• Fill in the form
• Retrieve your LoRa Keys
8.3. LoRa payloads for DIRIS B-10L measurements
The measurements from the DIRIS B-10L are organized under 7 LoRa proles.
Prole 1 (default prole): Single-load – Energies (consumption/production)
Data
Number
of words
Unit Comments
Type 0.5 - Always 2 for this profile
Profile number 0.25 - Always 1 for this profile
Profile version 0.25 - Always 1 for this profile
Date/Time 2 s
Number of seconds elapsed since 01/01/2000 00:00.
Remains at 0 as long as the date and time has not been written via the LoRa
network.
Ea+ 4 10-1 Wh
Ea- 4 10-1 Wh
Er+ 4 10-1 Varh
Er- 4 10-1 Varh
Pulse Meter 4 NA Native Input 1
Digital Inputs and
VirtualMonitor (iTR)
1 -
Bit field
• Bit 0: Digital Input 1 (Native)
• Bit 1: Digital Input 2 (Native)
• Bit 2: Digital Input 1 (optional module 1)
• Bit 3: Digital Input 2 (optional module 1)
• Bit 4: Digital Input 1 (optional module 2)
• Bit 5: Digital Input 2 (optional module 2)
• Bit 6: Digital Input 1 (optional module 3)
• Bit 7: Digital Input 2 (optional module 3)
• Bit 8: Digital Input 1 (optional module 4)
• Bit 9: Digital Input 2 (optional module 4)
• Bit 10: Voltage Detection iTR1
• Bit 11: Voltage Detection iTR2
• Bit 12: Voltage Detection iTR3
• Bit 13: Voltage Detection iTR4
Status change
counter
1 -
Half byte field:
• 4 bits: status change counter - Native Input 1
• 4 bits: status change counter - Native Input 2
• 4 bits: status change counter - Digital Input 1 (optional module 1)
• 4 bits: status change counter - Digital Input 2 (optional module 1)
TOTAL 25 (50 bytes)
To Next Page
Loading...
