MedDream VideoStation v4.00 User Manual 27
Receiver can be checked by pressing button - will send DICOM C-ECHO to verify basic connectivity by DICOM
protocol.
Once all settings are set, double check and press save button
REMOTE - hospital remote DICOM archive (PACS). This allows to send saved studies to hospital DICOM archive.
Typically requires to ask your DICOM archive administrator to register VS DICOM file receiver (LOCAL window AET
TITLE field) on DICOM archive as device (to allow send DICOM studies from VS to DICOM archive).
• AET TITLE – max 16 Latin1 characters. Requires to ask your administrator for this entity title to identify remote
DICOM archive.
• HOST OR IP ADDRESS – DICOM archive host or IP address. It is recommended to set IP address for faster
network lookup.
• PORT – max 65535 number. DICOM protocol common use is 104 or 11112 ports. Recommended to consult
administrator.
Picture 44. Remote DICOM archive settings.
To check remote DICOM archive - requires LOCAL VS AET TITLE to be registered on remote DICOM archive. Press
button to send DICOM C-ECHO and verify basic connectivity by DICOM protocol.
Once all settings are set, double check and press save button
WORKLIST – setup DICOM modality worklist server connection. This enables to search scheduled DICOM modality
worklist (scheduled patient procedures).
• AET TITLE – max 16 Latin1 characters. Requires to ask your administrator for this entity title to identify DICOM
modality worklist server.
• HOST OR IP ADDRESS – worklist server host or IP address. It is recommended to set IP address for faster network
lookup.
• PORT – max 65535 number. DICOM protocol common use is 104 or 11112 ports. Recommended to consult
administrator.
To Next Page
Loading...
