MedDream VideoStation v4.00 User Manual 4
Notes on the user manual
Purpose and availability of documentation
This user manual describes the operation with MedDream VideoStation software.
Correct operation of the system is imperative for its safe and successful functioning. You should therefore ensure that you
are thoroughly familiar with the user manual before setting up and using MedDream VideoStation for the first time.
The user manuals and other documentation enclosed with MedDream VideoStation should be kept accessible to users at all
times to ensure that the information required for the use of MedDream VideoStation is readily available.
MedDream VideoStation is not intended to replace skilled and qualified medical professional. The software should only be
used by people who have been trained and is acquainted with its functions, capabilities and limitations.
Users must be aware that the quality, accuracy and correctness of the output data displayed on the screen, printed or sent
from MedDream VideoStation depends on the quality, accuracy and correctness of the input data, the user interface with the
data, the quality, calibration and other parameters of printer or monitoring device.
MedDream VideoStation has been tested extensively, however, it is possible that errors may remain/emerge in the software.
Users must be aware of the potential for errors and in case of an error or for other assistance, please contact Softneta UAB
Customer support – e-mail support@softneta.com
Personal data breaches.
In the event of personal data breaches (including but not limited to cyber security breaches), inform the medical software
manufacturer Softneta UAB immediately (within 24 hours) using the following contacts:
Softneta Data Protection Officer - Raimundas Mikalauskas, phone +370 630 06808, e-mail: dpo@softneta.com (latest data
available at www.softneta.com)
Documentation
The electronic MedDream VideoStation Module User's Manual is available in Lithuanian and English languages on Softneta's
website (www.softneta.lt/www.softneta.com in the "Products" section), as well as access to supported software versions.
Instructions are included in the "Product Description" section in the "Downloads" section.
The software maintenance manual is provided in a separate document attached to this user manual.
If you require a paper user manual, please let us know by email: support@softneta.com. A paper user manual will be sent to
the address you specify no later than 24 hours after receiving your request.
Explanation of symbols used
The symbols used in this daily workflow refer to important safety information which warn against possible health risks or
fatal injuries and contain useful notes. Whenever you see these symbols, read the accompanying information carefully and
observe all safety notes and information in the user manual, daily workflow and on the device labels.
To Next Page
Loading...