10.3
{FILE}
> >
Remote command
is FL/. Refer
to
Chapter
4,
Section 6.18.
A section of memory
used to store DVM measurement
results, for later recall or
further external
processing if required.
Each result
is
stored as a block of
three
items;
parameter
1
,
parameter
2,
and time. Parameters
1
and 2 should
be chosen
before
the
file is
switched on, form the list of possible
parameters (via
the PARI
and PAR2 menus, see section
10.5).
10.4
{FILE SIZE}
> >
Remote command is FS7. Refer
to Chapter
4,
Section 6.18.
The number of memory
blocks (up to
~
450)
allocated
to the file.
File memory is shared
with up to 10 menu set-up
stores, which use 16 memory
blocks
each. Thus the maximum number
available to the file varies with
how
many stores are in
use.
A
result
is sent to the file whenever
it is switched [on] and
a
measurement
has
been completed.
If
more results
are sent to the file than
its size permits, the
earliest
filed
results
are discarded to make room
for the latest.
10.5
{PARI} and {PAR2}
>
>
Remote command
is PX/ and PY7. Refer to Chapter
4,
Section
6.
1 7.
These select the two
items to be
filed as parameter 1 and parameter
2,
respectively.
’Time’ is always
filed.
PARI and
PAR2 also limit
the choice of X ITEM and Y ITEM
in the PLOT
menu and what can be
transmitted via the SI 1287 output ports
to external devices.
10.6
{FLO/P}
> >
Remote
command is FBI. Refer
to
Chapter
4,
Section 6. 1 8.
This menu selects which two of
the three measurement items stored
in each file
block are
to
be displayed.
10.7 {HEADING}
> >
Remote command is RH/.
Refer to Chapter
4,
Section
6. 1 9.
Controls
the output of headings
above the columns of measurements
sent to the
RS423 port and to the GPIB when
it is in Talk Only mode.
When selected [on]
column headings are printed
above a set of measurements
and also whenever
menu changes are
made which invalidate the existing
column headings.
10.8
{ERROR BEEP}
> >
Remote command
is
EB7.
Refer to Chapter
4,
Section 6.25.
Error
tone
switch.
Selecting [off] stops
the
error
’beep’.
JWS /
S1
1287 User
Guide / Issue AF
3.29
To Next Page
Loading...