2
Safety
1.2 General Safety Precautions
• Overvoltage or wrong wiring may damage the battery module and cause
combustion which may be extremely dangerous;
• Leakage of electrolytes or flammable gas may be occurred due to any type of
product breakdown;
• Do not install the battery module in places where flammable and combustible
materials are stored, and in which an explosive atmosphere is present;
• The battery module wiring must be carried out by qualified personnel;
• Battery module must be serviced by qualified personal;
• Ensure that the grounding cable is connected before handling the battery
module.
1.3 Battery Handling Guide
Do's
• DO keep the battery module away from flammables materials, heat sources, and
water sources;
• DO keep the battery module out of reach of children and animals;
• DO practice proper battery storage by keeping the battery module in a clean
environment, free of dust, dirt and debris;
• DO store the battery module in a cool and dry place;
• DO seal the outer cable connection hole to prevent ingress of foreign objects;
• DO confirm that the wiring of the device must be correct
;
• DO install the device according to the local standards and regulations.
Don'ts
• DON'T expose the battery module to an open flame, or the temperature in excess
of 140°F/60°C;
• DON'T store or install the battery module in direct sunlight;
• DON'T install or operate the battery module in places where there is excessive
moisture or liquids;
• DON'T place the battery module in a high-voltage environment;
• DON'T disconnect, disassemble or repair the device by unqualified personnel.
Only a qualified personnel is allowed to handle, install and repair the device;
• DON'T damage the device by dropping, deforming, impacting, cutting or
To Next Page
Loading...
