47
Copyright © 2005 - 2014 Somfy SAS. All rights reserved. Non contractual images
EN
2. 4. 2. 4.
Re-setting the upper end limit
reaction by the end product.
1) Place the roller shutter at its upper end limit.
2)
3) Wait for 2 seconds.
4)
5) Repeat steps 3 and 4 four times.
The last back and forth movement is brief.
6) Place the roller shutter in the desired upper end
limit position.
7)
8) Wait for 2 seconds.
The new upper end limit position is programmed.
Re-setting the lower end limit
reaction by the end product.
1) Place the roller shutter at its lower end limit.
2)
3) Wait for 2 seconds.
4)
5) Repeat steps 3 and 4 four times.
The last back and forth movement is brief.
6) Place the roller shutter in the desired lower end
limit position.
7)
8) Wait for 2 seconds.
The new lower end limit position is programmed.
2. 4. 3.
1
2. 4. 3. 1. With the universal adjusting cable for wired electronic motors
-
3)
5)
7)
9)
1) 2)
4)
6)
8)
0.5 s
5 s
[Step 3
+
Step 4]
2 s
2 s
2) 3)
5)
7)
9)
1)
4)
6)
8)
0.5 s
5 s
[Step 3
+
Step 4]
2 s
2 s
8s
To Next Page
Loading...
