EasyManua.ls Logo

SOMMER RDC Vision+ - Page 38

SOMMER RDC Vision+
48 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
38
LED Colour Flash/illumination
sequences
Possible cause Corrective action
CLOS
E
OPEN
STOP
COM
CLOSE=
yellow
OPEN=
yellow
STOP=
green
O󰀨
• External command device not
activated/defective
• Activate/replace external
command device
On
• External command device not
activated/defective
• Enable/replace external
command device
MUFU
Yellow
O󰀨
• Multi-function relay not activated • Check settings in SOMlink menu
On
• Multi-function relay activated
CH1
CH2
CH3
CH4
Red
O󰀨
• No radio command pending • If necessary, press a transmitter
button
On
• Radio command pending • Release transmitter button
• “Delete command” mode active • Radio command can be deleted:
see page 27
• All memory locations for radio
commands occupied
• Delete memory locations or
extend with MEMO:
see page 27
STATUS
Green
On
• Normal mode • No action required
• Run times are being programmed • No action required
• Run times not programmed • Program run times:
see page 23
Yellow
O󰀨
• Door at a standstill or in the door
OPEN end position
• Press button to open the door
• Door moves in door OPEN direction • Press button to stop the door
Yellow
O󰀨
• Door at a standstill or in the door
CLOSE end position
• Press button to close the door
• Door moves in door CLOSE
direction
• Press button to stop the door
12. Troubleshooting

Table of Contents

Related product manuals