Chapter 5 • Navigator K2 Manager Advanced Features
35
Report command – The Report command button at the bottom of the macro editor
opens up your default web browser for viewing and printing of the open macro.
Trash Can – The Trash Can located at the bottom of the macro editor is used to
delete commands from a macro. Left click and hold the command you want to
delete and drag it to the Trash Can and release.
The Infrared from Library macro step type causes the macro
to output an Infrared command. Any number of Infrared commands can be added
to the macro by selecting the proper library and then dragging the desired
function(s) from the list on the right side to the macro display on the left side of the
Macro Editor.
If you do not have access to the Infrared Library with the desired function, but it is
assigned to a button in the current file, use the Infrared from Page step type to add
it to the macro.
Double-click the infrared command step in the macro if you need to edit any of the
parameters.
The Infrared from Page macro step type causes the macro to
output an Infrared command. The command is taken from a button in the current
file. Select the page containing the desired code and then drag the code from the
Available Buttons list on the right to the macro display on the left.
This should be used for maintaining files for which the Infrared Library is not
available. If the desired command is in an Infrared Library, use the Infrared from
Library step type.
Double-click the infrared command step in the macro if you need to edit any of the
parameters.
The Time Delay step causes the macro to pause for the time
specified by the Delay Time spin box. The time can be adjusted from 0.1 to 9.9
seconds. After you have set your desired delay time, drag the Time Delay icon from
the lower right to the macro display on the left.
Release the mouse button at the location where you would like to add the time
delay step.
To Next Page
Loading...
