SonicWall SonicWave Deployment Guide
Deployment Requirements per Model
30
SonicWave 231c
Deployment Requirements
SonicOS Firmware
SonicWave 231c access points are centrally managed by SonicWall network security appliances
running SonicOS 6.5.3.1 or higher
Power Source
Use a 802.3at compliant PoE injector or a PoE-enabled switch to provide power to each SonicWave 231c.
A 12 VDC adapter may also be used.
Internet Connectivity
An active Internet connection is required for your SonicWall network security appliance to download the
latest SonicWave 231c firmware.
Gigabit Ethernet Connectivity
The SonicWave 231c requires a 1 Gigabit connection to the SonicWall network security appliance to take
full advantage of the SonicWave 231c data throughput capability.
To Next Page
Loading...
