SonicWall SonicWave Deployment Guide
Verifying Operation
82
Verifying SonicWave 400 Series Operation
To verify that the SonicWave is provisioned and operational, in the MANAGE view, navigate to the Connectivity
|Access Points > Base Settings page in SonicOS. In the SonicPoint/SonicWave Objects table, the Status column
displays the <Short Product Name> status. It should say Operational.
To verify Internet connectivity through the SonicWave:
1 Connect a client device to the SonicWave by selecting the appropriate access point name (SSID).
2 Ensure that the client device is not connected to any other network connections (wired LAN, 3G/4G
WWAN).
3 In a browser, enter “https://www.SonicWall.com/” in the address bar and press Enter. The SonicWall
website displays. If you are unable to browse to a website, refer to Troubleshooting.
To Next Page
Loading...
