SonicWall SonicWave Deployment Guide
Deployment Requirements per Model
33
SonicWave 432e and 432i
Deployment Requirements
SonicOS Firmware
• SonicWave 432e and 432i access points are centrally managed by SonicWall network security appliances
running SonicOS 6.5 or higher.
Power Source
• Use a multi-gigabit 802.3at compliant PoE injector or switch to provide power to each SonicWave 432e or
432i.
Internet Connectivity
• An active Internet connection is required for your firewall to download the latest SonicWave firmware.
Gigabit Ethernet Connectivity
• The SonicWave 432e or SonicWave 432i hardware requires more bandwidth than a 1 Gigabit Ethernet
connection can handle. SonicWall recommends connecting your SonicWave (through a PoE device) to a 2.5 Gb
interface to take full advantage of the SonicWave 432e or SonicWave 432i data throughput capability.
See Product Safety and Regulatory Information.
To Next Page
Loading...
