Sonicware LIVEN MEGA SYNTHESIS - Restoring to factory default settings (factory reset)

System settings
102
Restoring to factory default settings (factory
reset)
1
Press and hold + POWER switch to
turn on the MEGA SYNTHESIS.
2
Press .
The step LEDs will show the progress.
When nished, OK will appear on the display.
・Press to cancel.
・ This will not restore sample waveform data to the factory de-
fault. To restore the sample waveform data, download it from the
SONICWARE website and import it.
Checking the system versions
1
Press and hold + POWER switch to
turn on the MEGA SYNTHESIS.
2
Press , and to check the versions.
Firmware Versions
P X.Y
Preset version
S X.Y
System version
B X.Y
Boot version
・ Press the same , or again to show the build num-
ber.
F
.
R S T
O K
V E R
Major version
Minor version
S X
.
Y