Sonicware LIVEN MEGA SYNTHESIS - Adjusting AMP LFO; Adjusting Sound Level

FM EDIT mode (Edit) - Setting the sound -
37
Adjusting AMP LFO
AMP LFO is a common setting for all operators.
Sensitivity Rate
0〜3 0 〜7
Adjusting the depth of
AMP LFO.
If set to 0, LFO will not
be applied even if the
operator's Amp LFO
parameter is on.
Adjusting the speed of
AMP LFO.
Adjusting Sound level
SOUND LEVEL allows you to adjust the overall volume of the sound
you create.
1
Press 〜 .
2
Turn .
Sound Level
0 〜 127