Sonicware LIVEN MEGA SYNTHESIS - Editing Envelopes; Editing Parameters

Editing envelopes
The YM2612 has a slightly unusual envelope that differs from a
typical synthesizer that controls ATTACK time and DECAY time.
The higher RATE knob value, faster envelope time will be.
SUSTAIN LEVEL sets volume when decay time ends.
Editing parameters
1
Press to select operators.
2
Turn knobs.
Envelope Generator
ATTACK RATE DECAY RATE SUSTAIN LEVEL SUSTAIN RATE
The speed at which
volume after note-
on.
The volume will
amplied to the
level set with the
LEVEL knob.
Decay speed to
SUSTAIN LEVEL
during note-on.
Volume will
decrease from
volume set with
the LEVEL knob
to volume set with
SUSTAIN LEVEL.
SUSTAIN volume
during note-on.
When SUSTAIN
RATE is 0, the
sound will continue
at the set volume
until note-o󱐯.
The speed at which
SUSTAIN LEVEL
reaches 0 during
note-on.
If set to 1 or higher,
volume will gradually
decrease even if a
key is pressed.
0 〜 31 0 〜 31 0 〜 127 0 〜 31
RELEASE RATE
Speed until LEVEL
reaches 0 after
note-o󱐯.
0 〜 31
FM EDIT mode (Edit) - Setting the operator -
34