69
• Speaker:
• Speaker option is enabled by default, the
PTT media is received through the phone
loudspeaker when this option is enabled.
• Speaker option can be disabled if you want to
receive the PTT media through the earpiece.
• Vibrate Incoming Call:
• The option Vibrate Incoming Call under PTT
settings to set the phone in vibrate mode while
receiving an incoming PTT call.
• When enabled, the handset will vibrate once for
2 seconds when PTT call is received.
• By default this feature is disabled.
• PTT Tones:
• PTT tone setting gives you an option to choose
PTT Alert Tones and PTT In-call Tones.
• The selected tone will be played for an
Incoming Call Alert, IPA ,MCA and all In-call
tones.
Notication Control:
• Instant Personal Alert:
• This setting gives you the option to enable
or disable the IPA notication alert being
displayed on your phone.
• On disabling this setting, the notication alert
message will not be displayed when you
receive an IPA.
• By default this setting is enabled.
• Missed Call Alert:
• This setting gives you the option to enable
or disable the MCA notication alert being
displayed on your phone.
• On disabling this setting, the notication alert
message will not be displayed if you miss an
incoming PTT call.
• By default this setting is enabled
• Call Reconnect Tone:
• When the user goes out of network or comes
back into network while in an ongoing PTT call,
a Call Reconnect Tone is played to indicate
the network reconnection.
• You have an option to enable or disable this
tone from the PTT settings.
• This option will be enabled by default.
PTT Settings Overview
To Next Page
Loading...
Need help?
General
